Palomar-modified some of our products and sold them under pr

MAUDE - Manufacturer and User Facility Device Experience. MAUDE data represents reports of adverse events involving medical devices. The data consists of voluntary reports since June 1993, user facility reports since 1991, distributor reports since 1993, and manufacturer reports since August 1996. Also, warning letters issued to device makers for FDA violations.

Palomar-modified some of our products and sold them under pr

PostPosted by hopeful19 » Mon Jan 23, 2012 4:18 am

This excerpt taken from the PMTI 10-Q filed May 7, 2009.

We have modified some of our products and sold them under prior 510(k) clearances. The FDA could retroactively decide the modifications required new 510(k) clearances and require us to cease marketing and/or recall the modified products.

Any modification to one of our 510(k) cleared devices that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) clearance. We may be required to submit pre-clinical and clinical data depending on the nature of the changes. We may not be able to obtain additional 510(k) clearances or pre-market approvals for modifications to, or additional indications for, our existing products in a timely fashion, or at all. Delays in obtaining future clearances or approvals would adversely affect our ability to introduce new or enhanced products into the market in a timely manner, which in turn would harm our revenue and operating results. We have modified some of our marketed devices, but we believe that new 510(k) clearances are not required. We cannot be certain that the FDA would agree with any of our decisions not to seek 510(k) clearance. If the FDA requires us to seek 510(k) clearance for any modification, we also may be required to cease marketing and/or recall the modified device until we obtain a new 510(k) clearance.

30

These excerpts taken from the PMTI 10-K filed Mar 5, 2009.

We have modified some of our products and sold them under prior 510(k) clearances. The FDA could retroactively decide the modifications required new 510(k) clearances and require us to cease marketing and/or recall the modified products.

Any modification to one of our 510(k) cleared devices that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) clearance. We may be required to submit pre-clinical and clinical data depending on the nature of the changes. We may not be able to obtain additional 510(k) clearances or pre-market approvals for modifications to, or additional indications for, our existing products in a timely fashion, or at all. Delays in obtaining future clearances or approvals would adversely affect our ability to introduce new or enhanced products into the market in a timely manner, which in turn would harm our revenue and operating results. We have modified some of our marketed devices, but we believe that new 510(k) clearances are not required. We cannot be certain that the FDA would agree with any of our decisions not to seek 510(k) clearance. If the FDA requires us to seek 510(k) clearance for any modification, we also may be required to cease marketing and/or recall the modified device until we obtain a new 510(k) clearance.

We have modified some of our
products and sold them under prior 510(k) clearances. The FDA could retroactively decide
the modifications required new 510(k) clearances and require us to cease marketing and/or
recall the modified products.




Any
modification to one of our 510(k) cleared devices that could significantly affect its
safety or effectiveness, or that would constitute a major change in its intended use,
requires a new 510(k) clearance. We may be required to submit pre-clinical and clinical
data depending on the nature of the changes. We may not be able to obtain additional
510(k) clearances or pre-market approvals for modifications to, or additional indications
for, our existing products in a timely fashion, or at all. Delays in obtaining future
clearances or approvals would adversely affect our ability to introduce new or enhanced
products into the market in a timely manner, which in turn would harm our revenue and
operating results. We have modified some of our marketed devices, but we believe that new
510(k) clearances are not required. We cannot be certain that the FDA would agree with any
of our decisions not to seek 510(k) clearance. If the FDA requires us to seek 510(k)
clearance for any modification, we also may be required to cease marketing and/or recall
the modified device until we obtain a new 510(k) clearance.




This excerpt taken from the PMTI 10-Q filed Nov 4, 2008.

We have modified some of our products and sold them under prior 510(k) clearances. The FDA could retroactively decide the modifications required new 510(k) clearances and require us to cease marketing and/or recall the modified products.

Any modification to one of our 510(k) cleared devices that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) clearance. We may be required to submit pre-clinical and clinical data depending on the nature of the changes. We may not be able to obtain additional 510(k) clearances or pre-market approvals for modifications to, or additional indications for, our existing products in a timely fashion, or at all. Delays in obtaining future clearances or approvals would adversely affect our ability to introduce new or enhanced products into the market in a timely manner, which in turn would harm our revenue and operating results. We have modified some of our marketed devices, but we believe that new 510(k) clearances are not required. We cannot be certain that the FDA would agree with any of our decisions not to seek 510(k) clearance. If the FDA requires us to seek 510(k) clearance for any modification, we also may be required to cease marketing and/or recall the modified device until we obtain a new 510(k) clearance.

30

This excerpt taken from the PMTI 10-Q filed Aug 7, 2008.

We have modified some of our products and sold them under prior 510(k) clearances. The FDA could retroactively decide the modifications required new 510(k) clearances and require us to cease marketing and/or recall the modified products.

Any modification to one of our 510(k) cleared devices that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) clearance. We may be required to submit pre-clinical and clinical data depending on the nature of the changes. We may not be able to obtain additional 510(k) clearances or pre-market approvals for modifications to, or additional indications for, our existing products in a timely fashion, or at all. Delays in obtaining future clearances or approvals would adversely affect our ability to introduce new or enhanced products into the market in a timely manner, which in turn would harm our revenue and operating results. We have modified some of our marketed devices, but we believe that new 510(k) clearances are not required. We cannot be certain that the FDA would agree with any of our decisions not to seek 510(k) clearance. If the FDA requires us to seek 510(k) clearance for any modification, we also may be required to cease marketing and/or recall the modified device until we obtain a new 510(k) clearance.

These excerpts taken from the PMTI 10-K filed Mar 6, 2008.

We have modified some of our products and sold them under prior 510(k) clearances. The FDA could retroactively decide the modifications required new 510(k) clearances and require us to cease marketing and/or recall the modified products.

Any modification to one of our 510(k) cleared devices that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) clearance. We may be required to submit pre-clinical and clinical data depending on the nature of the changes. We may not be able to obtain additional 510(k) clearances or pre-market approvals for modifications to, or additional indications for, our existing products in a timely fashion, or at all. Delays in obtaining future clearances or approvals would adversely affect our ability to introduce new or enhanced products into the market in a timely manner, which in turn would harm our revenue and operating results. We have modified some of our marketed devices, but we believe that new 510(k) clearances are not required. We cannot be certain that the FDA would agree with any of our decisions not to seek 510(k) clearance. If the FDA requires us to seek 510(k) clearance for any modification, we also may be required to cease marketing and/or recall the modified device until we obtain a new 510(k) clearance.

We have modified some of our
products and sold them under prior 510(k) clearances. The FDA could retroactively decide
the modifications required new 510(k) clearances and require us to cease marketing and/or
recall the modified products.




Any
modification to one of our 510(k) cleared devices that could significantly affect its
safety or effectiveness, or that would constitute a major change in its intended use,
requires a new 510(k) clearance. We may be required to submit pre-clinical and clinical
data depending on the nature of the changes. We may not be able to obtain additional
510(k) clearances or pre-market approvals for modifications to, or additional indications
for, our existing products in a timely fashion, or at all. Delays in obtaining future
clearances or approvals would adversely affect our ability to introduce new or enhanced
products into the market in a timely manner, which in turn would harm our revenue and
operating results. We have modified some of our marketed devices, but we believe that new
510(k) clearances are not required. We cannot be certain that the FDA would agree with any
of our decisions not to seek 510(k) clearance. If the FDA requires us to seek 510(k)
clearance for any modification, we also may be required to cease marketing and/or recall
the modified device until we obtain a new 510(k) clearance.










This excerpt taken from the PMTI 10-Q filed Nov 2, 2007.

We have modified some of our products and sold them under prior 510(k) clearances. The FDA could retroactively decide the modifications required new 510(k) clearances and require us to cease marketing and/or recall the modified products.

Any modification to one of our 510(k) cleared devices that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) clearance. We may be required to submit pre-clinical and clinical data depending on the nature of the changes. We may not be able to obtain additional 510(k) clearances or pre-market approvals for modifications to, or additional indications for, our existing products in a timely fashion, or at all. Delays in obtaining future clearances or approvals would adversely affect our ability to introduce new or enhanced products into the market in a timely manner, which in turn would harm our revenue and operating results. We have modified some of our marketed devices, but we believe that new 510(k) clearances are not required. We cannot be certain that the FDA would agree with any of our decisions not to seek 510(k) clearance. If the FDA requires us to seek 510(k) clearance for any modification, we also may be required to cease marketing and/or recall the modified device until we obtain a new 510(k) clearance.

This excerpt taken from the PMTI 10-Q filed Aug 3, 2007.

We have modified some of our products and sold them under prior 510(k) clearances. The FDA could retroactively decide the modifications required new 510(k) clearances and require us to cease marketing and/or recall the modified products.

Any modification to one of our 510(k) cleared devices that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) clearance. We may be required to submit pre-clinical and clinical data depending on the nature of the changes. We may not be able to obtain additional 510(k) clearances or pre-market approvals for modifications to, or additional indications for, our existing products in a timely fashion, or at all. Delays in obtaining future clearances or approvals would adversely affect our ability to introduce new or enhanced products into the market in a timely manner, which in turn would harm our revenue and operating results. We have modified some of our marketed devices, but we believe that new 510(k) clearances are not required. We cannot be certain that the FDA would agree with any of our decisions not to seek 510(k) clearance. If the FDA requires us to seek 510(k) clearance for any modification, we also may be required to cease marketing and/or recall the modified device until we obtain a new 510(k) clearance.

This excerpt taken from the PMTI 10-Q filed May 8, 2007.

We have modified some of our products and sold them under prior 510(k) clearances. The FDA could retroactively decide the modifications required new 510(k) clearances and require us to cease marketing and/or recall the modified products.

Any modification to one of our 510(k) cleared devices that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) clearance. We may be required to submit pre-clinical and clinical data depending on the nature of the changes. We may not be able to obtain additional 510(k) clearances or pre-market approvals for modifications to, or additional indications for, our existing products in a timely fashion, or at all. Delays in obtaining future clearances or approvals would adversely affect our ability to introduce new or enhanced products into the market in a timely manner, which in turn would harm our revenue and operating results. We have modified some of our marketed devices, but we believe that new 510(k) clearances are not required. We cannot be certain that the FDA would agree with any of our decisions not to seek 510(k) clearance. If the FDA requires us to seek 510(k) clearance for any modification, we also may be required to cease marketing and/or recall the modified device until we obtain a new 510(k) clearance.

This excerpt taken from the PMTI 10-K filed Mar 8, 2007.

We have modified some of our products and sold them under prior 510(k) clearances. The FDA could retroactively decide the modifications required new 510(k) clearances and require us to cease marketing and/or recall the modified products.

Any modification to one of our 510(k) cleared devices that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) clearance. We may be required to submit pre-clinical and clinical data depending on the nature of the changes. We may not be able to obtain additional 510(k) clearances or pre-market approvals for modifications to, or additional indications for, our existing products in a timely fashion, or at all. Delays in obtaining future clearances or approvals would adversely affect our ability to introduce new or enhanced products into the market in a timely manner, which in turn would harm our revenue and operating results. We have modified some of our marketed devices, but we believe that new 510(k) clearances are not required. We cannot be certain that the FDA would agree with any of our decisions not to seek 510(k) clearance. If the FDA requires us to seek 510(k) clearance for any modification, we also may be required to cease marketing and/or recall the modified device until we obtain a new 510(k) clearance.

This excerpt taken from the PMTI 10-Q filed Nov 3, 2006.

We have modified some of our products and sold them under prior 510(k) clearances. The FDA could retroactively decide the modifications required new 510(k) clearances and require us to cease marketing and/or recall the modified products.

Any modification to one of our 510(k) cleared devices that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) clearance. We may be required to submit pre-clinical and clinical data depending on the nature of the changes. We may not be able to obtain additional 510(k) clearances or pre-market approvals for modifications to, or additional indications for, our existing products in a timely fashion, or at all. Delays in obtaining future clearances or approvals would adversely affect our ability to introduce new or enhanced products in a timely manner, which in turn would harm our revenue and operating results. The FDA requires every manufacturer to make this determination in the first instance, but the FDA can review any such decision. We have modified some of our marketed devices, but we believe that new 510(k) clearances are not required. We cannot be certain that the FDA would agree with any of our decisions not to seek 510(k) clearance. If the FDA requires us to seek 510(k) clearance for any modification, we also may be required to cease marketing and/or recall the modified device until we obtain a new 510(k) clearance.

This excerpt taken from the PMTI 10-Q filed Aug 8, 2006.

We have modified some of our products and sold them under prior 510(k) clearances. The FDA could retroactively decide the modifications required new 510(k) clearances and require us to cease marketing and/or recall the modified products.

Any modification to one of our 510(k) cleared devices that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) clearance. We may be required to submit pre-clinical and clinical data depending on the nature of the changes. We may not be able to obtain additional 510(k) clearances or pre-market approvals for modifications to, or additional indications for, our existing products in a timely fashion, or at all. Delays in obtaining future clearances or approvals would adversely affect our ability to introduce new or enhanced products in a timely manner, which in turn would harm our revenue and operating results. The FDA requires every manufacturer to make this determination in the first instance, but the FDA can review any such decision. We have modified some of our marketed devices, but we believe that new 510(k) clearances are not required. We cannot be certain that the FDA would agree with any of our decisions not to seek 510(k) clearance. If the FDA requires us to seek 510(k) clearance for any modification, we also may be required to cease marketing and/or recall the modified device until we obtain a new 510(k) clearance.

This excerpt taken from the PMTI 10-Q filed May 9, 2006.

We have modified some of our products and sold them under prior 510(k) clearances. The FDA could retroactively decide the modifications required new 510(k) clearances and require us to cease marketing and/or recall the modified products.

Any modification to one of our 510(k) cleared devices that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) clearance. We may be required to submit pre-clinical and clinical data depending on the nature of the changes. We may not be able to obtain additional 510(k) clearances or pre-market approvals for modifications to, or additional indications for, our existing products in a timely fashion, or at all. Delays in obtaining future clearances or approvals would adversely affect our ability to introduce new or enhanced products in a timely manner, which in turn would harm our revenue and operating results. The FDA requires every manufacturer to make this determination in the first instance, but the FDA can review any such decision. We have modified some of our marketed devices, but we believe that new 510(k) clearances are not required. We cannot be certain that the FDA would agree with any of our decisions not to seek 510(k) clearance. If the FDA requires us to seek 510(k) clearance for any modification, we also may be required to cease marketing and/or recall the modified device until we obtain a new 510(k) clearance.

19

This excerpt taken from the PMTI 10-K filed Mar 6, 2006.

We have modified some of our products and sold them under prior 510(k) clearances. The FDA could retroactively decide the modifications required new 510(k) clearances and require us to cease marketing and/or recall the modified products.

Any modification to one of our 510(k) cleared devices that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) clearance. We may be required to submit pre-clinical and clinical data depending on the nature of the changes. We may not be able to obtain additional 510(k) clearances or pre-market approvals for modifications to, or additional indications for, our existing products in a timely fashion, or at all. Delays in obtaining future clearances or approvals would adversely affect our ability to introduce new or enhanced products in a timely manner, which in turn would harm our revenue and operating results. The FDA requires every manufacturer to make this determination in the first instance, but the FDA can review any such decision. We have modified some of our marketed devices, but we believe that new 510(k) clearances are not required. We cannot be certain that the FDA would agree with any of our decisions not to seek 510(k) clearance. If the FDA requires us to seek 510(k) clearance for any modification, we also may be required to cease marketing and/or recall the modified device until we obtain a new 510(k) clearance.

This excerpt taken from the PMTI 10-Q filed Nov 4, 2005.

We have modified some of our products and sold them under prior 510(k) clearances. The FDA could retroactively decide the modifications required new 510(k) clearances and require us to cease marketing and/or recall the modified products.

Any modification to one of our 510(k) cleared devices that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) clearance. We may be required to submit pre-clinical and clinical data depending on the nature of the changes. We may not be able to obtain additional 510(k) clearances or pre-market approvals for modifications to, or additional indications for, our existing products in a timely fashion, or at all. Delays in obtaining future clearances or approvals would adversely affect our ability to introduce new or enhanced products in a timely manner, which in turn would harm our revenue and operating results. The FDA requires every manufacturer to make this determination in the first instance, but the FDA can review any such decision. We have modified some of our marketed devices, but we believe that new 510(k) clearances are not required. We cannot be certain that the FDA would agree with any of our decisions not to seek 510(k) clearance. If the FDA requires us to seek 510(k) clearance for any modification, we also may be required to cease marketing and/or recall the modified device until we obtain a new 510(k) clearance.

This excerpt taken from the PMTI 10-Q filed Aug 5, 2005.

We have modified some of our products and sold them under prior 510(k) clearances. The FDA could retroactively decide the modifications required new 510(k) clearances and require us to cease marketing and/or recall the modified products.

Any modification to one of our 510(k) cleared devices that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) clearance. The FDA requires every manufacturer to make this determination in the first instance, but the FDA can review any such decision. We have modified some of our marketed devices, but we believe that new 510(k) clearances are not required. We cannot be certain that the FDA would agree with any of our decisions not to seek 510(k) clearance. If the FDA requires us to seek 510(k) clearance for any modification, we also may be required to cease marketing and/or recall the modified device until we obtain a new 510(k) clearance.

19

This excerpt taken from the PMTI 10-Q filed May 5, 2005.

We have modified some of our products and sold them under prior 510(k) clearances. The FDA could retroactively decide the modifications required new 510(k) clearances and require us to cease marketing and/or recall the modified products.

Any modification to one of our 510(k) cleared devices that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) clearance. The FDA requires every manufacturer to make this determination in the first instance, but the FDA can review any such decision. We have modified some of our marketed devices, but we believe that new 510(k) clearances are not required. We cannot be certain that the FDA would agree with any of our decisions not to seek 510(k) clearance. If the FDA requires us to seek 510(k) clearance for any modification, we also may be required to cease marketing and/or recall the modified device until we obtain a new 510(k) clearance.

This excerpt taken from the PMTI 10-K filed Mar 11, 2005.

We have modified some of our products and sold them under prior 510(k) clearances. The FDA could retroactively decide the modifications required new 510(k) clearances and require us to cease marketing and/or recall the modified products.

Any modification to one of our 510(k) cleared devices that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) clearance. The FDA requires every manufacturer to make this determination in the first instance, but the FDA can review any such decision. We have modified some of our marketed devices, but we believe that new 510(k) clearances are not required. We cannot be certain that the FDA would agree with any of our decisions not to seek 510(k) clearance. If the FDA requires us to seek 510(k) clearance for any modification, we also may be required to cease marketing and/or recall the modified device until we obtain a new 510(k) clearance.
"There's almost no risk involved," says Stephen Fanning, CEO of Solta Medical, which owns Fraxel.

The world is a dangerous place to live, not because of the people who do evil, but rather those who sit back & let it happen.
-Einstein
hopeful19
Long Time Member
Long Time Member
 
Posts: 1580
Joined: Fri Jun 18, 2010 5:47 pm

Return to FDA MAUDE Filings For Cosmetic Laser/Light Devices & FDA Warning Letters (PUBLIC)

Who is online

Users browsing this forum: No registered users and 0 guests